Machinery
Technical Parameters for Installation using Heat Fusion Tools
Outside Diameter | Welding Depth | Heating Time | Welding Time | Cooling Time |
mm | mm | seconds | seconds | seconds |
20 | 14.0 | 5 | 4 | 2 |
25 | 15.0 | 7 | 4 | 2 |
32 | 16.5 | 8 | 6 | 4 |
40 | 18.0 | 12 | 6 | 4 |
50 | 20.0 | 18 | 6 | 4 |
63 | 24.0 | 24 | 8 | 6 |
75 | 26.0 | 30 | 8 | 8 |
90 | 29.0 | 40 | 8 | 8 |
110 | 32.5 | 50 | 10 | 8 |
Note: | Heating time starts when both pipe and fitting are pushed into correct depth. Welding time begins when joints are connected. Cooling time is the time taken for the joints to be completely cured. Never reduce cooling time by pouring water or by other means. |